3utools Downgrad Ios

 
  1. Jun 25, 2019 Finally, someone has achieved a method to jailbreak IOS 9.3.5 iPad 2 iCloud bypassed using only Cydia impactor and 3utools to downgrade. Following this steps are enough to make ipad2 device bypassed untethered.
  2. How To Downgrade From Ios 10.2.1 To 10.2 With 3utools 8; How To Downgrade From Ios 10.2.1 To 10.2 With 3utools Computer; How To Downgrade or Restore iOS 10 and All others. Ample bass vst free download. Users can follow this How to downgrade tutorial for iOS 10.2 and all other firmware versions. The iPSW downloads will be the only difference the.
  1. 3utools Downgrade Ios 13
  2. 3utools Ios 6
  3. Iphone 4 Downgrade
  4. 3utools Downgrade Ios
  5. 3utools Downgrade Ios 14 To 13
  6. 3utools Downgrade Ios 6
  7. 3utools Downgrade Ios 14.2

Jailbreaking is available for all 32-bits devices after Phoenix and H3lix released. And jailbreaking could help to restore to some unsigned iOS versions. Here’s the completed tutorial about downgrading to any iOS version with shsh. You can save shsh on 3uTools restore to the current iOS version on your device.


Thanks developer tihmstar and his futurerestore tool.


Compatibility

iPhone 4s, iPhone 5, iPhone 5c, iPad 2, iPad 3, iPad 4, iPad mini, iPod touch 5G

Available Firmware to Restore

IMyFone Fixppo: Best iOS Downgrade Tool (iOS 14 Supported) When it comes to downgrading to the previous version due to any reason, iMyFone Fixppo iOS downgrade tool comes in handy and does the job perfectly. It is regarded as the most convenient iOS downgrade tool that can ease your burden of downgrading by a few clicks to achieve the task.

With corresponding SHSH, you can restore to iOS 5 - iOS 9. (Except iOS 9 on iPhone 5/5c)

Requirements

  • Futurerestore (downgrading tool) For iPhone 5/5c running on iOS 10+, please downgrade this: Futurerestore for iPhone 5/5c

  • 3uTools

  • iTunes

  • A 32-bit device

  • A jailbreak on the starting firmware.

  • The IPSW file for the destination firmware, you can download from http://www.3u.com/firmwares


On 3uTools server, I’ve only saved SHSH of iOS 9.3.5 and iOS 6.1.3 for our testing iDevice, iPhone 4s, but I saved the SHSH Of iOS 8.3 on another server. So I will take downgrading to iOS 8.3 for example.


Operation

1. Verify SHSH

(1) Check and download SHSH of iOS 8.3 you saved on 3uTools. (If you saved SHSH on another server, you can just downloaded.)



(2) This assistant tool is developed by a Chinese developer, there’s only Chinese version temporarily.

Download and unzip Futurerestore, and launch wndGui.exe, you will see as follow.



(3) Click the fifth button, '验证SHSH'. After you select the iOS firmware and SHSH, click “确定” to begin verifying.



(4) The following picture means that the SHSH is legit, it will automatically generate the .plist file of SHSH. You can put the .plist file and iOS 8.3 firmware in the new folder.


2. Enter KDFU mode

There are two ways for you enter KDFU mode. Method 1Install kdfu app. Please check the picture below to know the compatibility.




Method 2 Enter KDFU mode using Futurerestore


3utools Downgrade Ios 13

3. Downgrading

(1) After you enter KDFU mode, click the final button '立刻刷机', then it will automatically launch Futurerestore.



(2) Then input the following command

libfuturerestore.exe --latest-baseband --use-pwndfu -t

E:Desktop3uToolsiPhone4,1_8.3(12F70)_000002CA44143D4B(3067748826443).plist

E:Desktop3uToolsiPhone4,1_8.3_12F70_Restore.ipsw

The words in red is the path of firmware and shsh, please modify them based on your actual situation.


Note: If the form is wrong, you won't be able to downgrade, the form will be like: libfuturerestore.exe --latest-baseband --use-pwndfu -t oneblank the path of shshone blankthe path of firmware


3utools downgrade ios


(3) After you enter the command and press “Enter” to start downgrading process. If all your operations are correct, Futurerestore will be running. Please wait patiently till the process is finished.



Thanks for visiting. For more latest updates or supports, follow us on Facebook or Twitter.

Related Articles

Hey guys! are you mad because your device updated automatically and you dont like the latest version because you may find it buggy, battery draining and many other issues like this.
So, In this guide i have shown you how to downgrade or update to an unsigned version of iOS using shsh blobs.
So you maybe familiar with Shsh Blobs. and if you have them, you can use them to go back to the version you loved! There are some requirements to use this method, but yeah, everything requires something!
Before we start the process there are some important points to be kept it mind! So before we start scroll to the bottom of the post and read the FAQ section at the end of the video in which i have cleared some of the doubts you may have while considering this method! I assure you that section will help you.
So, now we are all done and we are ready to start the process.
If you want to skip the guide, then you can scroll down and you will find links to all of the files which are needed to be downloaded.
This is a bit longer method and requires you to download two ipsw files. So, if you have a limited data plan or slow internet speed, then check out this link below to read an easier method which requires you to download only 1 ipsw! And if today is your lucky day this method might work, otherwise you will have to scroll to the REAL METHOD! which requires your time and attention,
So, without any further delay, lets start the process?
  • Get the blobs from TSS SAVER .

  • Remember, as explained in the video tutorial and in the FAQ section in the video, you can only save the blobs of a version if it is signed right now.
  • Download the latest signed ipsw from ipsw.me

  • Download the ipsw of the version you’re restoring to from ipsw.me
  • Download Future Restore .

  • Download PLIST EDITOR .
  • Create a folder SHSH DOWNGRADE and place all files there.

  • Now open the latest ipsw with WinRAR ( DOWNLOAD WINRAR : LINK ).
  • Drag the BuildManifest file to the SHSH DOWNGRADE folder.

  • Then go to ipsw.me again and in your device section check the device information tab and note the BoardConfig. ( for example its d221ap for iPhone X GSM ).
  • After that open the BuildManifest.plist file and go to List View.

  • Click on Build Identities.
  • There will be many + signs there, each will be representing a different BoardConfig.

  • So click on the + sign then click on +Info and check one by one that which one of the BoardConfig matches with your device.
  • So in the one which matches your device’s board config, click on +Manifest.

  • In Manifest, to get the baseband file path click on +BasebandFirmware, then click on +Info and note the path. Then open the latest ipsw file with WinRAR again and go to the path.
  • And in +Manifest, to get the SEP file, click on +SEP, then click on +Info and note the path. Then open the latest ipsw file with WinRAR again and go to the path.

3utools Ios 6

  • So now you can move the latest ipsw file to another folder you dont need it now.
  • Now you’ll have all the files in the SHSH DOWNGRADE folder: FutureRestore, IPSW of the version you’re restoring to, shsh blobs file, [SEP Baseband BuildManifest] file from the latest IPSW.

Downgrad
  • Now you have to set the Nonce Generator value.

Iphone 4 Downgrade

  • Remember you need to be Jailbroken to do that.
  • For that, open shsh blobs file with Plist Editor and go to List View. Copy the generator value there. Now you have to set the nonce value on the iDevice. There are many method depending on the iOS version and which jailbreak are you using. Check which method is for you by going to this link : NONCE SETTERS

  • In some cases, you might not have NoApnonce blob in your blobs folder or your blobs might have a specific Nonce Generator Value. So, the 0x1111111111111111 nonce generator value wont work for you, so READ THIS POST to check how to find which Nonce Generator Value you should use.
  • So now you can connect your device using lightning cable, and Open Command Prompt / Terminal.

3utools Downgrade Ios


  • Now, drag FutureRestore in the terminal, then type -t, then drag the shsh blobs file, then type -s, then drag the SEP file, then type -b, then drag the Baseband file, then type -p, then drag the BuildManifest file, then type -m, then drag the BuildManifest file again, and then space and drag the IPSW of the version you’re restoring to.

3utools Downgrade Ios 14 To 13

  • It will look like this:
FutureRestore -t ShshBlobs -s SEP -b Baseband -p BuildManifest -m BuildManifest [space] IPSW3utools Downgrade Ios 6
Now press enter and the process will start. Leave your device connected for 10-15 minutes and after that your device will be restored to the unsigned IPSW.

3utools Downgrade Ios 14.2


LINKS USED IN THE VIDEO:

Latest Posts